Community
Modules 15

Data.ByteString.Char8

stable

Manipulate ByteStrings using Char operations. All Chars will be truncated to 8 bits. It can be expected that these functions will run at identical speeds to their Word8 equivalents in Data.ByteString.

More specifically these byte strings are taken to be in the subset of Unicode covered by code points 0-255. This covers Unicode Basic Latin, Latin-1 Supplement and C0+C1 Controls.

See:

This module is intended to be imported qualified, to avoid name clashes with Prelude functions. eg.

import qualified Data.ByteString.Char8 as C

The Char8 interface to bytestrings provides an instance of IsString for the ByteString type, enabling you to use string literals, and have them implicitly packed to ByteStrings. Use {-# LANGUAGE OverloadedStrings #-} to enable this.

The ByteString type

data ByteString

A space-efficient representation of a Word8 vector, supporting many efficient operations.

A ByteString contains 8-bit bytes, or by using the operations from Data.ByteString.Char8 it can be interpreted as containing 8-bit characters.

Introducing and eliminating ByteStrings

empty :: ByteString

O(1) The empty ByteString

singleton :: Char -> ByteString

O(1) Convert a Char into a ByteString

pack :: String -> ByteString

O(n) Convert a String into a ByteString

For applications with large numbers of string literals, pack can be a bottleneck.

unpack :: ByteString -> [Char]

O(n) Converts a ByteString to a String.

fromStrict :: S.StrictByteString -> LazyByteString

O(1) Convert a StrictByteString into a LazyByteString.

toStrict :: LazyByteString -> S.StrictByteString

O(n) Convert a LazyByteString into a StrictByteString.

Note that this is an expensive operation that forces the whole LazyByteString into memory and then copies all the data. If possible, try to avoid converting back and forth between strict and lazy bytestrings.

Basic interface

cons :: Char -> ByteString -> ByteString

O(n) cons is analogous to (:) for lists, but of different complexity, as it requires a memcpy.

snoc :: ByteString -> Char -> ByteString

O(n) Append a Char to the end of a ByteString. Similar to cons, this function performs a memcpy.

append :: ByteString -> ByteString -> ByteString

O(n) Append two ByteStrings

head :: ByteString -> Char

O(1) Extract the first element of a ByteString, which must be non-empty.

uncons :: ByteString -> Maybe (Char, ByteString)

O(1) Extract the head and tail of a ByteString, returning Nothing if it is empty.

unsnoc :: ByteString -> Maybe (ByteString, Char)

O(1) Extract the init and last of a ByteString, returning Nothing if it is empty.

last :: ByteString -> Char

O(1) Extract the last element of a packed string, which must be non-empty.

tail :: HasCallStack => ByteString -> ByteString

O(1) Extract the elements after the head of a ByteString, which must be non-empty. An exception will be thrown in the case of an empty ByteString.

This is a partial function, consider using uncons instead.

init :: HasCallStack => ByteString -> ByteString

O(1) Returns all the elements of a ByteString except the last one. An exception will be thrown in the case of an empty ByteString.

This is a partial function, consider using unsnoc instead.

null :: ByteString -> Bool

O(1) Test whether a ByteString is empty.

length :: ByteString -> Int

O(1) length returns the length of a ByteString as an Int.

Transforming ByteStrings

map :: (Char -> Char) -> ByteString -> ByteString

O(n) map f xs is the ByteString obtained by applying f to each element of xs

reverse :: ByteString -> ByteString

O(n) reverse xs efficiently returns the elements of xs in reverse order.

intersperse :: Char -> ByteString -> ByteString

O(n) The intersperse function takes a Char and a ByteString and `intersperses' that Char between the elements of the ByteString. It is analogous to the intersperse function on Lists.

intercalate :: ByteString -> [ByteString] -> ByteString

O(n) The intercalate function takes a ByteString and a list of ByteStrings and concatenates the list after interspersing the first argument between each element of the list.

transpose :: [ByteString] -> [ByteString]

The transpose function transposes the rows and columns of its ByteString argument.

Reducing ByteStrings (folds)

foldl :: (a -> Char -> a) -> a -> ByteString -> a

foldl, applied to a binary operator, a starting value (typically the left-identity of the operator), and a ByteString, reduces the ByteString using the binary operator, from left to right.

foldl' :: (a -> Char -> a) -> a -> ByteString -> a

foldl' is like foldl, but strict in the accumulator.

foldl1 :: (Char -> Char -> Char) -> ByteString -> Char

foldl1 is a variant of foldl that has no starting value argument, and thus must be applied to non-empty ByteStrings.

foldl1' :: (Char -> Char -> Char) -> ByteString -> Char

A strict version of foldl1

foldr :: (Char -> a -> a) -> a -> ByteString -> a

foldr, applied to a binary operator, a starting value (typically the right-identity of the operator), and a packed string, reduces the packed string using the binary operator, from right to left.

foldr' :: (Char -> a -> a) -> a -> ByteString -> a

foldr' is a strict variant of foldr

foldr1 :: (Char -> Char -> Char) -> ByteString -> Char

foldr1 is a variant of foldr that has no starting value argument, and thus must be applied to non-empty ByteStrings

foldr1' :: (Char -> Char -> Char) -> ByteString -> Char

A strict variant of foldr1

Special folds

concat :: [ByteString] -> ByteString

O(n) Concatenate a list of ByteStrings.

concatMap :: (Char -> ByteString) -> ByteString -> ByteString

Map a function over a ByteString and concatenate the results

any :: (Char -> Bool) -> ByteString -> Bool

Applied to a predicate and a ByteString, any determines if any element of the ByteString satisfies the predicate.

all :: (Char -> Bool) -> ByteString -> Bool

Applied to a predicate and a ByteString, all determines if all elements of the ByteString satisfy the predicate.

maximum :: ByteString -> Char

maximum returns the maximum value from a ByteString

minimum :: ByteString -> Char

minimum returns the minimum value from a ByteString

Building ByteStrings

** Scans

scanl :: (Char -> Char -> Char) -> Char -> ByteString -> ByteString

scanl is similar to foldl, but returns a list of successive reduced values from the left:

scanl f z [x1, x2, ...] == [z, z `f` x1, (z `f` x1) `f` x2, ...]

Note that

last (scanl f z xs) == foldl f z xs.

scanl1 :: (Char -> Char -> Char) -> ByteString -> ByteString

scanl1 is a variant of scanl that has no starting value argument:

scanl1 f [x1, x2, ...] == [x1, x1 `f` x2, ...]

scanr :: (Char -> Char -> Char) -> Char -> ByteString -> ByteString

scanr is the right-to-left dual of scanl.

scanr1 :: (Char -> Char -> Char) -> ByteString -> ByteString

scanr1 is a variant of scanr that has no starting value argument.

Accumulating maps

mapAccumL :: (acc -> Char -> (acc, Char)) -> acc -> ByteString -> (acc, ByteString)

The mapAccumL function behaves like a combination of map and foldl; it applies a function to each element of a ByteString, passing an accumulating parameter from left to right, and returning a final value of this accumulator together with the new ByteString.

mapAccumR :: (acc -> Char -> (acc, Char)) -> acc -> ByteString -> (acc, ByteString)

The mapAccumR function behaves like a combination of map and foldr; it applies a function to each element of a ByteString, passing an accumulating parameter from right to left, and returning a final value of this accumulator together with the new ByteString.

Generating and unfolding ByteStrings

replicate :: Int -> Char -> ByteString

O(n) replicate n x is a ByteString of length n with x the value of every element. The following holds:

replicate w c = unfoldr w (\u -> Just (u,u)) c

This implementation uses memset(3)

unfoldr :: (a -> Maybe (Char, a)) -> a -> ByteString

O(n), where n is the length of the result. The unfoldr function is analogous to the List 'unfoldr'. unfoldr builds a ByteString from a seed value. The function takes the element and returns Nothing if it is done producing the ByteString or returns Just (a,b), in which case, a is the next character in the string, and b is the seed value for further production.

Examples:

unfoldr (\x -> if x <= '9' then Just (x, succ x) else Nothing) '0' == "0123456789"

unfoldrN :: Int -> (a -> Maybe (Char, a)) -> a -> (ByteString, Maybe a)

O(n) Like unfoldr, unfoldrN builds a ByteString from a seed value. However, the length of the result is limited by the first argument to unfoldrN. This function is more efficient than unfoldr when the maximum length of the result is known.

The following equation relates unfoldrN and unfoldr:

unfoldrN n f s == take n (unfoldr f s)

Substrings

Breaking strings

take :: Int -> ByteString -> ByteString

O(1) take n, applied to a ByteString xs, returns the prefix of xs of length n, or xs itself if n > length xs.

takeEnd :: Int -> ByteString -> ByteString

O(1) takeEnd n xs is equivalent to drop (length xs - n) xs. Takes n elements from end of bytestring.

>>> takeEnd 3 "abcdefg"
"efg"
>>> takeEnd 0 "abcdefg"
""
>>> takeEnd 4 "abc"
"abc"

drop :: Int -> ByteString -> ByteString

O(1) drop n xs returns the suffix of xs after the first n elements, or empty if n > length xs.

dropEnd :: Int -> ByteString -> ByteString

O(1) dropEnd n xs is equivalent to take (length xs - n) xs. Drops n elements from end of bytestring.

>>> dropEnd 3 "abcdefg"
"abcd"
>>> dropEnd 0 "abcdefg"
"abcdefg"
>>> dropEnd 4 "abc"
""

splitAt :: Int -> ByteString -> (ByteString, ByteString)

O(1) splitAt n xs is equivalent to (take n xs, drop n xs).

takeWhile :: (Char -> Bool) -> ByteString -> ByteString

takeWhile, applied to a predicate p and a ByteString xs, returns the longest prefix (possibly empty) of xs of elements that satisfy p.

takeWhileEnd :: (Char -> Bool) -> ByteString -> ByteString

takeWhileEnd, applied to a predicate p and a ByteString xs, returns the longest suffix (possibly empty) of xs of elements that satisfy p.

dropWhile :: (Char -> Bool) -> ByteString -> ByteString

dropWhile p xs returns the suffix remaining after takeWhile p xs.

dropWhileEnd :: (Char -> Bool) -> ByteString -> ByteString

dropWhileEnd p xs returns the prefix remaining after takeWhileEnd @p xs@.

dropSpace :: ByteString -> ByteString

dropSpace efficiently returns the ByteString argument with white space Chars removed from the front. It is more efficient than calling dropWhile for removing whitespace. I.e.

dropWhile isSpace == dropSpace

span :: (Char -> Bool) -> ByteString -> (ByteString, ByteString)

span p xs breaks the ByteString into two segments. It is equivalent to (takeWhile p xs, dropWhile p xs)

spanEnd :: (Char -> Bool) -> ByteString -> (ByteString, ByteString)

spanEnd behaves like span but from the end of the ByteString. We have

spanEnd (not.isSpace) "x y z" == ("x y ","z")

and

spanEnd (not . isSpace) ps
   ==
let (x,y) = span (not.isSpace) (reverse ps) in (reverse y, reverse x)

break :: (Char -> Bool) -> ByteString -> (ByteString, ByteString)

break p is equivalent to span (not . p).

breakEnd :: (Char -> Bool) -> ByteString -> (ByteString, ByteString)

breakEnd behaves like break but from the end of the ByteString

breakEnd p == spanEnd (not.p)

group :: ByteString -> [ByteString]

The group function takes a ByteString and returns a list of ByteStrings such that the concatenation of the result is equal to the argument. Moreover, each string in the result contains only equal elements. For example,

group "Mississippi" = ["M","i","ss","i","ss","i","pp","i"]

It is a special case of groupBy, which allows the programmer to supply their own equality test. It is about 40% faster than groupBy (==)

groupBy :: (Char -> Char -> Bool) -> ByteString -> [ByteString]

The groupBy function is the non-overloaded version of group.

inits :: ByteString -> [ByteString]

O(n) Returns all initial segments of the given ByteString, shortest first.

tails :: ByteString -> [ByteString]

O(n) Returns all final segments of the given ByteString, longest first.

initsNE :: ByteString -> NonEmpty ByteString

O(n) Returns all initial segments of the given ByteString, shortest first.

tailsNE :: ByteString -> NonEmpty ByteString

O(n) Returns all final segments of the given ByteString, longest first.

strip :: ByteString -> ByteString

Remove leading and trailing white space from a ByteString.

stripPrefix :: ByteString -> ByteString -> Maybe ByteString

O(n) The stripPrefix function takes two ByteStrings and returns Just the remainder of the second iff the first is its prefix, and otherwise Nothing.

stripSuffix :: ByteString -> ByteString -> Maybe ByteString

O(n) The stripSuffix function takes two ByteStrings and returns Just the remainder of the second iff the first is its suffix, and otherwise Nothing.

Breaking into many substrings

split :: Char -> ByteString -> [ByteString]

O(n) Break a ByteString into pieces separated by the byte argument, consuming the delimiter. I.e.

split '\n' "a\nb\nd\ne" == ["a","b","d","e"]
split 'a'  "aXaXaXa"    == ["","X","X","X",""]
split 'x'  "x"          == ["",""]
split undefined ""      == []  -- and not [""]

and

intercalate [c] . split c == id
split == splitWith . (==)

As for all splitting functions in this library, this function does not copy the substrings, it just constructs new ByteStrings that are slices of the original.

splitWith :: (Char -> Bool) -> ByteString -> [ByteString]

O(n) Splits a ByteString into components delimited by separators, where the predicate returns True for a separator element. The resulting components do not contain the separators. Two adjacent separators result in an empty component in the output. eg.

splitWith (=='a') "aabbaca" == ["","","bb","c",""]
splitWith undefined ""      == []  -- and not [""]

Breaking into lines and words

lines :: ByteString -> [ByteString]

lines breaks a ByteString up into a list of ByteStrings at newline Chars ('\n'). The resulting strings do not contain newlines.

Note that it does not regard CR ('\r') as a newline character.

words :: ByteString -> [ByteString]

words breaks a ByteString up into a list of words, which were delimited by Chars representing white space.

unlines :: [ByteString] -> ByteString

unlines joins lines, appending a terminating newline after each.

Equivalent to concat . Data.List.concatMap (\x -> [x, singleton '\n']).

unwords :: [ByteString] -> ByteString

The unwords function is analogous to the unlines function, on words.

Predicates

isPrefixOf :: ByteString -> ByteString -> Bool

O(n) The isPrefixOf function takes two ByteStrings and returns True if the first is a prefix of the second.

isSuffixOf :: ByteString -> ByteString -> Bool

O(n) The isSuffixOf function takes two ByteStrings and returns True iff the first is a suffix of the second.

The following holds:

isSuffixOf x y == reverse x `isPrefixOf` reverse y

However, the real implementation uses memcmp to compare the end of the string only, with no reverse required..

isInfixOf :: ByteString -> ByteString -> Bool

Check whether one string is a substring of another.

Search for arbitrary substrings

breakSubstring :: ByteString -> ByteString -> (ByteString, ByteString)

Break a string on a substring, returning a pair of the part of the string prior to the match, and the rest of the string.

The following relationships hold:

break (== c) l == breakSubstring (singleton c) l

For example, to tokenise a string, dropping delimiters:

tokenise x y = h : if null t then [] else tokenise x (drop (length x) t)
    where (h,t) = breakSubstring x y

To skip to the first occurrence of a string:

snd (breakSubstring x y)

To take the parts of a string before a delimiter:

fst (breakSubstring x y)

Note that calling `breakSubstring x` does some preprocessing work, so you should avoid unnecessarily duplicating breakSubstring calls with the same pattern.

ByteString

String to search for

ByteString

String to search in

(ByteString, ByteString)

Head and tail of string broken at substring

Searching ByteStrings

Searching by equality

elem :: Char -> ByteString -> Bool

O(n) elem is the ByteString membership predicate. This implementation uses memchr(3).

notElem :: Char -> ByteString -> Bool

O(n) notElem is the inverse of elem

Searching with a predicate

find :: (Char -> Bool) -> ByteString -> Maybe Char

O(n) The find function takes a predicate and a ByteString, and returns the first element in matching the predicate, or Nothing if there is no such element.

filter :: (Char -> Bool) -> ByteString -> ByteString

O(n) filter, applied to a predicate and a ByteString, returns a ByteString containing those characters that satisfy the predicate.

partition :: (Char -> Bool) -> ByteString -> (ByteString, ByteString)

Indexing ByteStrings

index :: ByteString -> Int -> Char

O(1) ByteString index (subscript) operator, starting from 0.

indexMaybe :: ByteString -> Int -> Maybe Char

O(1) ByteString index, starting from 0, that returns Just if:

0 <= n < length bs

(!?) :: ByteString -> Int -> Maybe Char

O(1) ByteString index, starting from 0, that returns Just if:

0 <= n < length bs

elemIndex :: Char -> ByteString -> Maybe Int

O(n) The elemIndex function returns the index of the first element in the given ByteString which is equal (by memchr) to the query element, or Nothing if there is no such element.

elemIndices :: Char -> ByteString -> [Int]

O(n) The elemIndices function extends elemIndex, by returning the indices of all elements equal to the query element, in ascending order.

elemIndexEnd :: Char -> ByteString -> Maybe Int

O(n) The elemIndexEnd function returns the last index of the element in the given ByteString which is equal to the query element, or Nothing if there is no such element. The following holds:

elemIndexEnd c xs = case elemIndex c (reverse xs) of
  Nothing -> Nothing
  Just i  -> Just (length xs - 1 - i)

findIndex :: (Char -> Bool) -> ByteString -> Maybe Int

The findIndex function takes a predicate and a ByteString and returns the index of the first element in the ByteString satisfying the predicate.

findIndices :: (Char -> Bool) -> ByteString -> [Int]

The findIndices function extends findIndex, by returning the indices of all elements satisfying the predicate, in ascending order.

findIndexEnd :: (Char -> Bool) -> ByteString -> Maybe Int

O(n) The findIndexEnd function takes a predicate and a ByteString and returns the index of the last element in the ByteString satisfying the predicate.

count :: Char -> ByteString -> Int

count returns the number of times its argument appears in the ByteString

count = length . elemIndices

Also

count '\n' == length . lines

But more efficiently than using length on the intermediate list.

Zipping and unzipping ByteStrings

zip :: ByteString -> ByteString -> [(Char, Char)]

O(n) zip takes two ByteStrings and returns a list of corresponding pairs of Chars. If one input ByteString is short, excess elements of the longer ByteString are discarded. This is equivalent to a pair of unpack operations, and so space usage may be large for multi-megabyte ByteStrings

zipWith :: (Char -> Char -> a) -> ByteString -> ByteString -> [a]

zipWith generalises zip by zipping with the function given as the first argument, instead of a tupling function. For example, zipWith (+) is applied to two ByteStrings to produce the list of corresponding sums.

packZipWith :: (Char -> Char -> Char) -> ByteString -> ByteString -> ByteString

A specialised version of `zipWith` for the common case of a simultaneous map over two ByteStrings, to build a 3rd.

unzip :: [(Char, Char)] -> (ByteString, ByteString)

unzip transforms a list of pairs of Chars into a pair of ByteStrings. Note that this performs two pack operations.

Ordered ByteStrings

sort :: ByteString -> ByteString

O(n) Sort a ByteString efficiently, using counting sort.

Reading from ByteStrings

readInt :: ByteString -> Maybe (Int, ByteString)

Try to read a signed Int value from the ByteString, returning Just (val, str) on success, where val is the value read and str is the rest of the input string. If the sequence of digits decodes to a value larger than can be represented by an Int, the returned value will be Nothing.

readInt does not ignore leading whitespace, the value must start immediately at the beginning of the input string.

Examples

>>> readInt "-1729 sum of cubes"
Just (-1729," sum of cubes")
>>> readInt "+1: readInt also accepts a leading '+'"
Just (1, ": readInt also accepts a leading '+'")
>>> readInt "not a decimal number"
Nothing
>>> readInt "12345678901234567890 overflows maxBound"
Nothing
>>> readInt "-12345678901234567890 underflows minBound"
Nothing

readInt64 :: ByteString -> Maybe (Int64, ByteString)

A variant of readInt specialised to Int64.

readInt32 :: ByteString -> Maybe (Int32, ByteString)

A variant of readInt specialised to Int32.

readInt16 :: ByteString -> Maybe (Int16, ByteString)

A variant of readInt specialised to Int16.

readInt8 :: ByteString -> Maybe (Int8, ByteString)

A variant of readInt specialised to Int8.

readWord :: ByteString -> Maybe (Word, ByteString)

Try to read a Word value from the ByteString, returning Just (val, str) on success, where val is the value read and str is the rest of the input string. If the sequence of digits decodes to a value larger than can be represented by a Word, the returned value will be Nothing.

readWord does not ignore leading whitespace, the value must start with a decimal digit immediately at the beginning of the input string. Leading + signs are not accepted.

Examples

>>> readWord "1729 sum of cubes"
Just (1729," sum of cubes")
>>> readWord "+1729 has an explicit sign"
Nothing
>>> readWord "not a decimal number"
Nothing
>>> readWord "98765432109876543210 overflows maxBound"
Nothing

readWord64 :: ByteString -> Maybe (Word64, ByteString)

A variant of readWord specialised to Word64.

readWord32 :: ByteString -> Maybe (Word32, ByteString)

A variant of readWord specialised to Word32.

readWord16 :: ByteString -> Maybe (Word16, ByteString)

A variant of readWord specialised to Word16.

readWord8 :: ByteString -> Maybe (Word8, ByteString)

A variant of readWord specialised to Word8.

readInteger :: ByteString -> Maybe (Integer, ByteString)

readInteger reads an Integer from the beginning of the ByteString. If there is no Integer at the beginning of the string, it returns Nothing, otherwise it just returns the Integer read, and the rest of the string.

readInteger does not ignore leading whitespace, the value must start immediately at the beginning of the input string.

Examples

>>> readInteger "-000111222333444555666777888999 all done"
Just (-111222333444555666777888999," all done")
>>> readInteger "+1: readInteger also accepts a leading '+'"
Just (1, ": readInteger also accepts a leading '+'")
>>> readInteger "not a decimal number"
Nothing

readNatural :: ByteString -> Maybe (Natural, ByteString)

readNatural reads a Natural number from the beginning of the ByteString. If there is no Natural number at the beginning of the string, it returns Nothing, otherwise it just returns the number read, and the rest of the string.

readNatural does not ignore leading whitespace, the value must start with a decimal digit immediately at the beginning of the input string. Leading + signs are not accepted.

Examples

>>> readNatural "000111222333444555666777888999 all done"
Just (111222333444555666777888999," all done")
>>> readNatural "+000111222333444555666777888999 explicit sign"
Nothing
>>> readNatural "not a decimal number"
Nothing

Low level CString conversions

Copying ByteStrings

copy :: ByteString -> ByteString

O(n) Make a copy of the ByteString with its own storage. This is mainly useful to allow the rest of the data pointed to by the ByteString to be garbage collected, for example if a large string has been read in, and only a small part of it is needed in the rest of the program.

Packing CStrings and pointers

packCString :: CString -> IO ByteString

O(n). Construct a new ByteString from a CString. The resulting ByteString is an immutable copy of the original CString, and is managed on the Haskell heap. The original CString must be null terminated.

packCStringLen :: CStringLen -> IO ByteString

O(n). Construct a new ByteString from a CStringLen. The resulting ByteString is an immutable copy of the original CStringLen. The ByteString is a normal Haskell value and will be managed on the Haskell heap.

Using ByteStrings as CStrings

useAsCString :: ByteString -> (CString -> IO a) -> IO a

O(n) construction Use a ByteString with a function requiring a null-terminated CString. The CString is a copy and will be freed automatically; it must not be stored or used after the subcomputation finishes.

useAsCStringLen :: ByteString -> (CStringLen -> IO a) -> IO a

O(n) construction Use a ByteString with a function requiring a CStringLen. As for useAsCString this function makes a copy of the original ByteString. It must not be stored or used after the subcomputation finishes.

Beware that this function is not required to add a terminating NUL byte at the end of the CStringLen it provides. If you need to construct a pointer to a null-terminated sequence, use useAsCString (and measure length independently if desired).

I/O with ByteStrings

| ByteString I/O uses binary mode, without any character decoding or newline conversion. The fact that it does not respect the Handle newline mode is considered a flaw and may be changed in a future version.

Standard input and output

getLine :: IO ByteString

Read a line from stdin.

getContents :: IO ByteString

getContents. Read stdin strictly. Equivalent to hGetContents stdin The Handle is closed after the contents have been read.

putStr :: ByteString -> IO ()

Write a ByteString to stdout.

putStrLn :: ByteString -> IO ()

Write a ByteString to stdout, appending a newline byte.

Unlike putStr, this is not atomic: other threads might write to stdout between writing of the bytestring and the newline.

interact :: (ByteString -> ByteString) -> IO ()

The interact function takes a function of type ByteString -> ByteString as its argument. The entire input from the standard input device is passed to this function as its argument, and the resulting string is output on the standard output device.

Files

readFile :: FilePath -> IO ByteString

Read an entire file strictly into a ByteString.

writeFile :: FilePath -> ByteString -> IO ()

Write a ByteString to a file.

appendFile :: FilePath -> ByteString -> IO ()

Append a ByteString to a file.

I/O with Handles

hGetLine :: Handle -> IO ByteString

Read a line from a handle

hGetContents :: Handle -> IO ByteString

Read a handle's entire contents strictly into a ByteString.

This function reads chunks at a time, increasing the chunk size on each read. The final string is then reallocated to the appropriate size. For files > half of available memory, this may lead to memory exhaustion. Consider using readFile in this case.

The Handle is closed once the contents have been read, or if an exception is thrown.

hGet :: Handle -> Int -> IO ByteString

Read a ByteString directly from the specified Handle. This is far more efficient than reading the characters into a String and then using pack. First argument is the Handle to read from, and the second is the number of bytes to read. It returns the bytes read, up to n, or empty if EOF has been reached.

hGet is implemented in terms of hGetBuf.

If the handle is a pipe or socket, and the writing end is closed, hGet will behave as if EOF was reached.

hGetSome :: Handle -> Int -> IO ByteString

Like hGet, except that a shorter ByteString may be returned if there are not enough bytes immediately available to satisfy the whole request. hGetSome only blocks if there is no data available, and EOF has not yet been reached.

hGetNonBlocking :: Handle -> Int -> IO ByteString

hGetNonBlocking is similar to hGet, except that it will never block waiting for data to become available, instead it returns only whatever data is available. If there is no data available to be read, hGetNonBlocking returns empty.

Note: on Windows and with Haskell implementation other than GHC, this function does not work correctly; it behaves identically to hGet.

hPut :: Handle -> ByteString -> IO ()

Outputs a ByteString to the specified Handle.

hPutNonBlocking :: Handle -> ByteString -> IO ByteString

Similar to hPut except that it will never block. Instead it returns any tail that did not get written. This tail may be empty in the case that the whole string was written, or the whole original string if nothing was written. Partial writes are also possible.

Note: on Windows and with Haskell implementation other than GHC, this function does not work correctly; it behaves identically to hPut.

hPutStr :: Handle -> ByteString -> IO ()

A synonym for hPut, for compatibility

hPutStrLn :: Handle -> ByteString -> IO ()

Write a ByteString to a handle, appending a newline byte.

Unlike hPutStr, this is not atomic: other threads might write to the handle between writing of the bytestring and the newline.

Maintainer
dons00gmail.com, duncancommunity.haskell.org
Portability
portable
Copyright
(c) Don Stewart 2006-2008 (c) Duncan Coutts 2006-2011
License
BSD-style
Build record and source files

Community contribution. The service has not verified this documentation. The generator reported 11 diagnostics.

Target: Linux on x86-64. Some inferred types and resolved links are not available.

Generator: aihc-haddock-aa6debbd-web-3

Metadata snapshot: 35f1f56d3dce7f0c7af322ec05f2fba4d1a04564930537462a4ba21b64b756fa

Open the dependency plan · Download the documentation model

Import a package

Enter a package name and an exact version from Hackage. The site contains imported versions only.